Landscape scene in Gaston County, North Carolina
⚡ North Carolina
Explore Gaston County by eBike
eBikeListings › North Carolina › Gaston County › Things to Do

Things To Do on an eBike in Gaston County, NC

Gaston County's eBike rides are paved city greenways: the Avon-Catawba Creeks Greenway and Highland Rail Trail in Gastonia, the A & E Riverfront Trail in Mount Holly and the short river greenways in Cramerton. Rocky Branch Park in Belmont adds a singletrack mountain bike trail.

We found no published eBike rule for these greenways, so check the posted signs at each trailhead.

Orientation map, not a verified riding route.Open county map

Where to ride in Gaston County

Gastonia has the longest paved routes. On the county's eastern edge, Mount Holly sits on the Catawba River and Cramerton and Belmont on the South Fork. Every route below is inside Gaston County.

Named eBike routes and access checks

1. Avon-Catawba Creeks Greenway, Gastonia

Go Gaston, the county tourism site, lists this paved, easy greenway at 4.5 miles one way. Its Carolina Thread Trail guide says the greenway follows the creeks along Gastonia's southern edge, dips under busy roadways and keeps riders off city sidewalks. Trailheads are at Ferguson Park (1401 Golf Course Drive) and near the Army National Guard facility (2100 Robinwood Road).

2. Highland Rail Trail, Gastonia

Go Gaston lists the Highland Rail Trail at 200 E Long Ave, 2.1 miles one way on paved and gravel surfaces. TrailLink says it follows the former Carolina and Northwestern Railway from downtown Gastonia north to Sims Legion Park, where you can park at 1001 N. Marietta St.

3. A & E Riverfront Trail, Mount Holly

Part of the Mount Holly River Hawk Greenway, this wide paved trail runs along the Catawba River. Go Gaston says its 1.2-mile greenway connects to a 0.7-mile paved loop in Tuckaseege Park and a 0.3-mile paved segment at the Municipal Complex, and that downtown Mount Holly is 0.3 miles away along the Catawba Avenue sidewalks.

4. Cramerton greenways: Goat Island and Riverside Park

The Town of Cramerton lists the Goat Island Greenway (141 8th Avenue) as a .5-mile asphalt greenway and the Riverside Park Greenway (75 Riverside Drive) as a .75-mile asphalt greenway. The half-mile Standpipe Connector, a sidewalk trail, links them with the Historic Baltimore Pier and River Access. Go Gaston says the Goat Island Greenway crosses the South Fork Catawba River on two pedestrian bridges.

5. Rocky Branch Mountain Bike Park, Belmont

Go Gaston describes a 55-acre park between Belmont and Cramerton built around a hand-built singletrack trail of approximately five miles for intermediate and advanced riders, with a pump track at the start. Cramerton says it is a City of Belmont park with a trailhead off the Stuart W. Cramer Trail at 101 Lakewood Road. Ask the City of Belmont whether eMTBs are allowed before you ride one there.

North Carolina eBike rules

North Carolina's G.S. 20-4.01 defines an electric assisted bicycle as having fully operable pedals and a motor of no more than 750 watts, with a top speed on motor power alone of no more than 20 mph on a level surface. The same section says the term motor vehicle does not include electric assisted bicycles, except where the law says otherwise. From December 1, 2026, Session Law 2026-46 replaces that definition with three classes, Class 1 and Class 2 up to 20 mph and Class 3 with pedal assist up to 28 mph, allows eBikes on roadways, bike lanes and multiuse paths unless local or state park rules say otherwise, and requires helmets for riders under 18 on Class 3 eBikes. Towns and counties may then restrict eBike classes and set speed limits on paths, so follow the posted rules at each trailhead.

Half-day and full-day eBike plans

Half day, Gastonia: Start at Ferguson Park and ride the Avon-Catawba Creeks Greenway east toward Robinwood Road, then return.

Half day, river towns: Ride the A & E Riverfront Trail and the Tuckaseege Park loop in Mount Holly, then walk the sidewalk into downtown.

Full day: Pair a Gastonia ride on the Highland Rail Trail with the Cramerton greenways, crossing to Goat Island Park on the pedestrian bridges.

What not to ride

Rocky Branch on a beginner's skills. Go Gaston says the singletrack is built for intermediate and advanced riders.

Any trail with a posted ban. We found no published greenway eBike rule in the county, so follow the signs at the trailhead.

Gravel stretches on a road-tire eBike. Go Gaston lists the Highland Rail Trail with paved and gravel surfaces.

When to ride Gaston County

For a shaded ride, the Carolina Thread Trail guide points to the Pharr Yarns Family Trail in McAdenville, about two wooded miles of mostly singletrack designed for foot and bike traffic, as a good choice in summer heat. Park at 119 Willow Drive.

eBike shops in Gaston County

South Main Cycles in Belmont sells electric bikes and offers service and repair. It lists hours of 11:00am to 7:00pm Tuesday and Wednesday and 10:00am to 5:00pm Thursday to Saturday. Ride-A-Bike Bicycle Shop is in downtown Gastonia. Call ahead to confirm eBike service.

Motorcycle shop · Gastonia, NC
★★★★½4.8(1,684 reviews)
📍 3916 E Franklin Blvd Gastonia, NC 28056 📞 (704) 824-1820
Bicycle Shop · Gastonia, NC
★★★★½4.8(134 reviews)
📍 140 E Main Ave Gastonia, NC 28052 📞 (877) 574-0656
Bicycle Shop · Gastonia, NC
★★★★½4.8(6 reviews)
📍 140 E Main Ave Gastonia, NC 28052 📞 (877) 574-0656

Frequently asked questions

What is the longest paved greenway in Gaston County?

Go Gaston lists the Avon-Catawba Creeks Greenway in Gastonia at 4.5 miles one way, with a trailhead at Ferguson Park, 1401 Golf Course Drive.

Where do I park for the Highland Rail Trail?

TrailLink lists parking at the north end in Sims Legion Park, 1001 N. Marietta St., Gastonia.

How long is the A & E Riverfront Trail in Mount Holly?

Go Gaston says the paved greenway is 1.2 miles and connects to a 0.7-mile loop in Tuckaseege Park and a 0.3-mile segment at the Municipal Complex.

Is there mountain biking in Gaston County?

Yes. Rocky Branch Park between Belmont and Cramerton has a hand-built singletrack trail of approximately five miles for intermediate and advanced riders, plus a pump track.

What counts as an eBike in North Carolina?

G.S. 20-4.01 defines an electric assisted bicycle as having fully operable pedals and a motor of no more than 750 watts, with a top motor-only speed of 20 mph on a level surface. From December 1, 2026, Session Law 2026-46 replaces this with Class 1, Class 2 and Class 3, where Class 3 gives pedal assist up to 28 mph.

Where can I buy or repair an eBike in Gaston County?

South Main Cycles in Belmont sells electric bikes and offers service and repair. Call to confirm hours before you go.

All eBike shops in Gaston County

See the Gaston County eBike shops page for the full directory, and our North Carolina eBike laws guide for state rules.