eBikeListings › North Carolina › Forsyth County › Things to Do

Things To Do on an eBike in Forsyth County

Forsyth County eBike planning starts with the sourced routes below and the posted access rule, not a shop pin. #ForsythCountyNC

This guide separates sourced route facts from permission questions. Check the manager, the posted access rule, weather, and closures before travelling.

Orientation map, not a verified riding route.Open county map

Sponsored

Fat Tires. Big Comfort.

Padded seat · basket ready

View on Amazon →

Sponsored

TST Fat Tire eBike

Removable battery · 7-speed

Shop Amazon →

Sponsored

Wallke R60 · 4000W Peak Power

150Nm · 44 MPH · Sale $1,999

Shop Wallke →

Where to ride in Forsyth County

Forsyth County planning uses manager-listed bicycle routes. Each route on this page lists Forsyth County in its Facts.

Compare the five route options

No single route fits every rider or every electric bicycle. Compare distance, starting point, surface, and managing authority before choosing.

Bethabara Greenway

Start from Reynolda Road and Hayes Forest Drive. The documented distance is 2.6 miles. Expect Asphalt, Boardwalk, Dirt, Gravel, Sand, Woodchips. Confirm the access note before choosing this over another Forsyth County option.

Kerner Mill Greenway

Start from 219 Oakhurst St. (Kernersville) and Kilburn Way (Kernersville). The documented distance is 1.2 miles. Expect Asphalt, Boardwalk. Confirm the access note before choosing this over another Forsyth County option.

Long Branch Trail (NC)

Start from MLK Jr. Drive and Salem Creek Greenway. The documented distance is 1.7 miles. Expect Asphalt. Confirm the access note before choosing this over another Forsyth County option.

Muddy Creek Greenway

Start from County Club Road and Summerfield community, south of Shattalon Drive. The documented distance is 4 miles. Expect Asphalt. Confirm the access note before choosing this over another Forsyth County option.

Salem Creek Greenway

Start from Marketplace Mall (off Peters Creek Parkway) and Salem Lake Trail. The documented distance is 5.2 miles. Expect Asphalt, Boardwalk, Concrete. Confirm the access note before choosing this over another Forsyth County option.

eBike shop hubs

Use these city directories for addresses, phone numbers, detail pages, and claim links. A city page is a contact index, not proof of current rental stock or route access.

Other local service contacts

These cards are preserved for repair, sales, or general service enquiries. They are not presented as rental operators.

Piedmont eBikes

Electric bicycle store · Lewisville, NC

★★★★★5.0(79 reviews)

📍 6275 Shallowford Rd Suite 120 Lewisville, NC 27023 📞 (336) 890-6677

Website → 📞 Call 📍 Directions Details → 🔑 Claim

Crossroads Cycling Co - Clemmons

Bicycle Shop · Clemmons, NC

★★★★★5.0(23 reviews)

📍 6315 Jessie Ln Clemmons, NC 27012 📞 (336) 893-8535

Website → 📞 Call 📍 Directions Details → 🔑 Claim

Gerhardt Cycles

Sporting goods store · Winston-Salem, NC

★★★★★5.0(1 reviews)

📍 1001 Marshall St SW B-24 Winston-Salem, NC 27101 📞 (336) 618-6980

Website → 📞 Call 📍 Directions Details → 🔑 Claim

Sponsored

GoTrax Comfort Ride

Fat-tire lifestyle rider

Shop Amazon →

Sponsored

TST Fat Tire

Path-ready long-range option

Shop Amazon →

Sponsored

2026 Wallke R60

Up to 180+ miles on one charge

Shop Wallke →

Named eBike routes and access checks

1. Bethabara Greenway

Distance: 2.6 miles

Start: Reynolda Road and Hayes Forest Drive

Surface and rider fit: Asphalt, Boardwalk, Dirt, Gravel, Sand, Woodchips

eBike access: eBike access for Forsyth County: Bethabara Greenway is a manager-listed bicycling route. G.S. 20-4.01 defines an electric assisted bicycle with a motor of no more than 750 watts. The motor-only speed on a level surface is no greater than 20 miles per hour. These sections do not divide electric assisted bicycles into classes and do not set a statewide operator age. Trail access remains manager-specific. This route lists Forsyth County in its managing-source Facts.

Etiquette and planning: Plan Bethabara Greenway as a Forsyth County ride from the published start. Recheck the manager notice the same day. Do not treat a directory card as permission to ride.

Bethabara Greenway official or managing-source information

2. Kerner Mill Greenway

Distance: 1.2 miles

Start: 219 Oakhurst St. (Kernersville) and Kilburn Way (Kernersville)

Surface and rider fit: Asphalt, Boardwalk

eBike access: eBike access for Forsyth County: Kerner Mill Greenway is a manager-listed bicycling route. G.S. 20-4.01 defines an electric assisted bicycle with a motor of no more than 750 watts. The motor-only speed on a level surface is no greater than 20 miles per hour. These sections do not divide electric assisted bicycles into classes and do not set a statewide operator age. Trail access remains manager-specific. This route lists Forsyth County in its managing-source Facts.

Etiquette and planning: Plan Kerner Mill Greenway as a Forsyth County ride from the published start. Recheck the manager notice the same day. Do not treat a directory card as permission to ride.

Kerner Mill Greenway official or managing-source information

3. Long Branch Trail (NC)

Distance: 1.7 miles

Start: MLK Jr. Drive and Salem Creek Greenway

Surface and rider fit: Asphalt

eBike access: eBike access for Forsyth County: Long Branch Trail (NC) is a manager-listed bicycling route. G.S. 20-4.01 defines an electric assisted bicycle with a motor of no more than 750 watts. The motor-only speed on a level surface is no greater than 20 miles per hour. These sections do not divide electric assisted bicycles into classes and do not set a statewide operator age. Trail access remains manager-specific. This route lists Forsyth County in its managing-source Facts.

Etiquette and planning: Plan Long Branch Trail (NC) as a Forsyth County ride from the published start. Recheck the manager notice the same day. Do not treat a directory card as permission to ride.

Long Branch Trail (NC) official or managing-source information

4. Muddy Creek Greenway

Distance: 4 miles

Start: County Club Road and Summerfield community, south of Shattalon Drive

Surface and rider fit: Asphalt

eBike access: eBike access for Forsyth County: Muddy Creek Greenway is a manager-listed bicycling route. G.S. 20-4.01 defines an electric assisted bicycle with a motor of no more than 750 watts. The motor-only speed on a level surface is no greater than 20 miles per hour. These sections do not divide electric assisted bicycles into classes and do not set a statewide operator age. Trail access remains manager-specific. This route lists Forsyth County in its managing-source Facts.

Etiquette and planning: Plan Muddy Creek Greenway as a Forsyth County ride from the published start. Recheck the manager notice the same day. Do not treat a directory card as permission to ride.

Muddy Creek Greenway official or managing-source information

5. Salem Creek Greenway

Distance: 5.2 miles

Start: Marketplace Mall (off Peters Creek Parkway) and Salem Lake Trail

Surface and rider fit: Asphalt, Boardwalk, Concrete

eBike access: eBike access for Forsyth County: Salem Creek Greenway is a manager-listed bicycling route. G.S. 20-4.01 defines an electric assisted bicycle with a motor of no more than 750 watts. The motor-only speed on a level surface is no greater than 20 miles per hour. These sections do not divide electric assisted bicycles into classes and do not set a statewide operator age. Trail access remains manager-specific. This route lists Forsyth County in its managing-source Facts.

Etiquette and planning: Plan Salem Creek Greenway as a Forsyth County ride from the published start. Recheck the manager notice the same day. Do not treat a directory card as permission to ride.

Salem Creek Greenway official or managing-source information

Half-day and full-day eBike plans

Half day in Forsyth County: ride Bethabara Greenway out and back from the published start, and leave battery reserve for the return.

Full day in Forsyth County: compare Bethabara Greenway and Kerner Mill Greenway by surface and endpoints, then pick one. Do not stitch them into an unpublished connection.

Fallback in Forsyth County: if the first trailhead is closed, use the next sourced route on this page rather than a pin with no managing source.

For a route day in Forsyth County, carry water, a charged phone, the managing source, and only the tools you know how to use. A portable power station for a Forsyth County trailhead base is an optional charging accessory, not permission to plug in or a substitute for conservative range planning. Build the Forsyth County return around the battery already on the bike; never assume a public trailhead outlet is available.

Plan the route, service stop, and return together

A useful Forsyth County plan starts with one documented route, not a list of pins. Compare Bethabara Greenway, Kerner Mill Greenway, and Long Branch Trail (NC) by start point and surface. Put the longest or least certain option first only when weather, daylight, and battery reserve support it. Otherwise, choose the shorter confirmed outing and keep the second route as a true fallback.

Use Lewisville as the first service hub for Forsyth County riders because it is represented by an existing directory card. Call about repairs or rentals before driving. A shop cannot override a park, trail authority, road closure, or private owner. Keep the manager’s source open on the same phone that holds the route and emergency contacts.

For each of the five Forsyth County entries above, note whether the mileage is a loop, one way, or chosen by turnaround. Then budget the full return. Surface, elevation, temperature, wind, rider weight, assist level, and tire pressure all change consumption. Leave enough reserve to return without searching for an outlet. If the published information is incomplete, shorten this county ride rather than converting uncertainty into a precise claim.

What not to ride in Forsyth County

In Forsyth County, do not ride a closed segment or a trail the managing authority has closed to bicycles. G.S. 20-4.01 defines one electric assisted bicycle, not three classes. Trail access remains manager-specific.

When to ride Forsyth County

In Forsyth County, ride the documented route in daylight, avoid ice and high water, and recheck the manager notice the same day. Summer heat and winter shoulders both change range on these surfaces.

North Carolina eBike laws and route permission

G.S. 20-4.01 defines an electric assisted bicycle as a bicycle with two or three wheels, a seat or saddle, fully operable pedals, and an electric motor of no more than 750 watts. The maximum speed on a level surface when powered solely by that motor is no greater than 20 miles per hour. These sections do not divide electric assisted bicycles into classes.

G.S. 20-171.1 includes an electric assisted bicycle, as defined in G.S. 20-4.01, in the bicycle definition for that part. These sections do not set a statewide operator age. G.S. 20-171.8 defines a bicycle for the Child Bicycle Safety Act as a human-powered vehicle. That definition does not adopt the electric assisted bicycle in G.S. 20-4.01. Trail access remains manager-specific.

Frequently asked questions

Where should I start planning an eBike ride in Forsyth County?

Start with Bethabara Greenway for a Forsyth County ride. Its documented start is Reynolda Road and Hayes Forest Drive. Check the linked manager information, current closures, and the posted access rule before travelling. Settle this before you ride a Forsyth County route.

Does every bicycle route in Forsyth County allow every electric-bicycle class?

North Carolina does not divide an electric assisted bicycle into classes. G.S. 20-4.01 defines one device: a motor of no more than 750 watts, and a motor-only speed no greater than 20 miles per hour on a level surface. Confirm the posted rule for the Forsyth County segment before you ride. Settle this before you ride a Forsyth County route.

What age and helmet rule applies in North Carolina?

G.S. 20-4.01 and G.S. 20-171.1 do not set a statewide operator age for an electric assisted bicycle. G.S. 20-171.8 defines a bicycle for the Child Bicycle Safety Act as a human-powered vehicle. That definition does not adopt the electric assisted bicycle. Confirm the posted rule for the Forsyth County segment you plan to ride. Settle this before you ride a Forsyth County route.

Do the Forsyth County directory cards confirm rentals or battery repair?

No, and that applies to the Forsyth County cards specifically. A directory card is a contact lead. Call with the date, rider height, bike brand, motor system, and intended route. Ask the business to confirm the exact rental, diagnostic, or repair service before travelling. Settle this before you ride a Forsyth County route.

How should I estimate range for a Forsyth County ride?

Use the full return distance for Bethabara Greenway or the chosen alternative, not a best-case manufacturer range. Include elevation, surface, weather, detours, and the least confident rider in the plan. Settle this before you ride a Forsyth County route.

What should I do when a Forsyth County trailhead, bridge, or access road is closed?

On a Forsyth County route, turn around and follow the manager’s closure notice. Do not bypass barriers or cross private property. Choose a separately confirmed route rather than inventing a connection on the ground. Settle this before you ride a Forsyth County route.

All eBike shops in Forsyth County

The complete local directory is the Forsyth County eBike shops and repair contacts page. This guide owns route planning; the county hub owns the full shop list.