Moffat County rides around Craig. The strongest documented bicycle routes here are the regional corridors listed below. Nearby-county and regional options are labelled as such, because they are not local loops. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into three classes, so the real question is which manager controls each surface. #MoffatCOBikeTrails
This guide separates sourced route facts from permission questions. Check the manager, the bicycle class, weather, and closures before travelling.
No single Moffat County corridor covers the county. The routes below mix published lengths from each trail's own manager listing with honest access records where no named measured route was located. Surfaces range from asphalt city paths to crushed-stone and ballast rail beds. Front Range and high-plains paths face wind, hail and summer thunderstorms, mountain corridors face afternoon lightning, and high-country rail-trails stay cooler even in July, with snow lingering into June.
No single route fits every rider or every electric bicycle. Compare distance, starting point, surface, and managing authority before choosing.
Start from Walton Pond near US 40 and James Brown Bridge on Shield Dr.. The documented distance is 7 miles published length. Expect Asphalt. Confirm the access note before choosing this over another Moffat County option.
Start from Jerry Murphy Road, just north of CO 47 and S. La Crosse Ave. and Stockyard Rd.. The documented distance is 4.7 miles published length. Expect Concrete. Confirm the access note before choosing this over another Moffat County option.
Start from dead end just south of US Hwy 160 (Trinidad) and County Rd 20.8 (Trinidad). The documented distance is 2.5 miles published length. Expect Concrete. Confirm the access note before choosing this over another Moffat County option.
Start from Mackenzie Ave. and Pueblo Community College on US 50. The documented distance is 7 miles published length. Expect Crushed Stone, Gravel. Confirm the access note before choosing this over another Moffat County option.
Start from Arkansas River Trail and Juniper Road. The documented distance is 8 miles published length. Expect Concrete. Confirm the access note before choosing this over another Moffat County option.
Use these city directories for addresses, phone numbers, detail pages, and claim links. A city page is a contact index, not proof of current rental stock or route access.
These cards are preserved for repair, sales, or general service enquiries. They are not presented as rental operators.
Distance: 7 miles published length
Start: Walton Pond near US 40 and James Brown Bridge on Shield Dr.
Surface and rider fit: Asphalt
eBike access: eBike access: Yampa River Core Trail is a manager-listed bicycling route over asphalt. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Moffat County.
Etiquette and planning: Documented corridor serving Routt counties. Treat the published length as the whole corridor, not a county-exclusive loop, and plan the turnaround by time and battery. From Moffat County, treat this as a drive-in option rather than a local loop.
Yampa River Core Trail (nearby, Routt County) official or managing-source information
Distance: 4.7 miles published length
Start: Jerry Murphy Road, just north of CO 47 and S. La Crosse Ave. and Stockyard Rd.
Surface and rider fit: Concrete
eBike access: eBike access: Fountain Creek Trail is a manager-listed bicycling route over concrete. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Moffat County.
Etiquette and planning: Documented corridor in Pueblo counties. Treat the published length as the whole corridor, plan the turnaround by time and battery, and allow travel time to the trailhead. From Moffat County, treat this as a drive-in option rather than a local loop.
Fountain Creek Trail (regional day trip, Pueblo County) official or managing-source information
Distance: 2.5 miles published length
Start: dead end just south of US Hwy 160 (Trinidad) and County Rd 20.8 (Trinidad)
Surface and rider fit: Concrete
eBike access: eBike access: Purgatoire Riverwalk is a manager-listed bicycling route over concrete. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Moffat County.
Etiquette and planning: Documented corridor in Las Animas counties. Treat the published length as the whole corridor, plan the turnaround by time and battery, and allow travel time to the trailhead. From Moffat County, treat this as a drive-in option rather than a local loop.
Purgatoire Riverwalk (regional day trip, Las Animas County) official or managing-source information
Distance: 7 miles published length
Start: Mackenzie Ave. and Pueblo Community College on US 50
Surface and rider fit: Crushed Stone, Gravel
eBike access: eBike access: Arkansas Riverwalk Trail is a manager-listed bicycling route over crushed stone, gravel. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Moffat County.
Etiquette and planning: Documented corridor in Fremont counties. Treat the published length as the whole corridor, plan the turnaround by time and battery, and allow travel time to the trailhead. From Moffat County, treat this as a drive-in option rather than a local loop.
Arkansas Riverwalk Trail (regional day trip, Fremont County) official or managing-source information
Distance: 8 miles published length
Start: Arkansas River Trail and Juniper Road
Surface and rider fit: Concrete
eBike access: eBike access: Pueblo Reservoir Trail is a manager-listed bicycling route over concrete. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Moffat County.
Etiquette and planning: Documented corridor in Pueblo counties. Treat the published length as the whole corridor, plan the turnaround by time and battery, and allow travel time to the trailhead. From Moffat County, treat this as a drive-in option rather than a local loop.
Pueblo Reservoir Trail (regional day trip, Pueblo County) official or managing-source information
Half day: start with Yampa River Core Trail (nearby, Routt County) from Walton Pond near US 40 and James Brown Bridge on Shield Dr. and turn around at half your comfortable range.
Full day: combine Fountain Creek Trail (regional day trip, Pueblo County) with Purgatoire Riverwalk (regional day trip, Las Animas County) only if the weather, surface and battery reserve support both, and keep the third as a fallback.
For a route day in Moffat County, carry water, a charged phone, the managing source, and only the tools you know how to use. A portable power station for a Moffat County trailhead base is an optional charging accessory, not permission to plug in or a substitute for conservative range planning. Build the Moffat County return around the battery already on the bike; never assume a public trailhead outlet is available.
A useful Moffat County plan starts with one documented route, not a list of pins. Compare Yampa River Core Trail (nearby, Routt County), Fountain Creek Trail (regional day trip, Pueblo County), and Purgatoire Riverwalk (regional day trip, Las Animas County) by start point and surface. Put the longest or least certain option first only when weather, daylight, and battery reserve support it. Otherwise, choose the shorter confirmed outing and keep the second route as a true fallback.
Use Craig as the first service hub for Moffat County riders because it is represented by an existing directory card. Call about repairs or rentals before driving. A shop cannot override a park, trail authority, road closure, or private owner. Keep the manager’s source open on the same phone that holds the route and emergency contacts.
For each of the five Moffat County entries above, note whether the mileage is a loop, one way, or chosen by turnaround. Then budget the full return. Surface, elevation, temperature, wind, rider weight, assist level, and tire pressure all change consumption. Leave enough reserve to return without searching for an outlet. If the published information is incomplete, shorten this county ride rather than converting uncertainty into a precise claim.
Do not ride a Moffat County river path or rail corridor during flooding, and do not assume a converted rail bed is paved. Avoid exposed alpine and high-plains corridors at midday in July and August, do not treat a nearby-county or regional route as a local loop, and do not ride a high-country path during an afternoon thunderstorm or before snowmelt has cleared the surface.
April through June and September through October are the best Moffat County months for a long ride. Summer riding works early or late, and winter city paths depend on whether the city has cleared snow and ice.
C.R.S. 42-1-102(28.5) defines an electrical assisted bicycle as a vehicle with two or three wheels, fully operable pedals, and an electric motor not exceeding 750 watts, and it must match one of three classes. Class 1 assists only while the rider pedals and stops assisting at 20 mph. Class 2 may assist whether or not the rider is pedaling and stops assisting at 20 mph. Class 3 assists only while the rider pedals and stops assisting at 28 mph. The same section excludes electrical assisted bicycles from the motor-vehicle definition, so the practical questions are class, equipment, and which manager controls the surface.
C.R.S. 42-4-221 is the equipment rule. Since January 1, 2018 a manufacturer or distributor must permanently affix a label showing classification number, top assisted speed, and motor wattage in at least 9-point Arial type, and a person may not knowingly change speed capability or motor engagement without replacing that label. Class 2 motors must disengage when the brakes are applied. Class 1 and Class 3 motors must disengage when the rider stops pedaling. Class 3 must carry a speedometer. Lights, a rear red reflector, and brakes that stop the bicycle within 25 feet from 10 mph on dry, level, clean pavement are also required. C.R.S. 42-3-103 exempts electrical assisted bicycles from motor-vehicle registration.
C.R.S. 42-4-1412 gives a rider of an electrical assisted bicycle the rights and duties of a vehicle driver except where a special rule applies, and it lets local ordinances regulate operation as provided in C.R.S. 42-4-111. Class 1 and Class 2 may be ridden on a bike or pedestrian path where bicycles are authorized, unless the local authority prohibits that use. Class 3 may not be ridden on a bike or pedestrian path unless the path is within a street or highway or the local authority permits it. A person under 16 shall not ride a Class 3 electrical assisted bicycle except as a passenger on a bicycle designed to accommodate passengers. A person shall not operate or ride as a passenger on a Class 3 electrical assisted bicycle unless each person under 18 wears a bicycle helmet that meets CPSC or ASTM specifications and is secured with a chin strap while the bicycle is in motion. Read the Colorado eBike laws guide, then check the current notice from the manager of the exact route.
Moffat County planning starts with the surface, not the shop list. 5 of the five routes below carry a published length taken from that trail's own manager listing, and the rest are labelled as regional day trips rather than local loops. Ride Yampa River Core Trail (nearby, Routt County) first from Walton Pond near US 40 and James Brown Bridge on Shield Dr. and treat its published length as the whole corridor, so pick a turnaround point that still leaves battery for the ride back. Moffat County surfaces run from asphalt city paths to crushed stone, ballast and cinder rail beds, and a wider tyre is worth more here than more motor. Check the managing agency notice for the exact segment on the morning you ride, because a closure, a resurfacing or a seasonal gate changes the plan more than any spec sheet does.
Start with Yampa River Core Trail (nearby, Routt County) for a Moffat County ride. Its documented start is Walton Pond near US 40 and James Brown Bridge on Shield Dr.. Check the linked manager information, current closures, and the posted access rule before travelling. Settle this before you ride a Moffat County route.
No. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but a Moffat County route can still be narrower: C.R.S. 42-4-1412 lets a local authority prohibit Class 1 and Class 2 on a path it controls, and Class 3 is off bike or pedestrian paths unless the path is within a street or highway or the local authority permits it. Settle this before you ride a Moffat County route.
C.R.S. 42-4-1412(15) requires that each person under 18 wear a bicycle helmet that meets CPSC or ASTM specifications and is secured with a chin strap while a Class 3 electrical assisted bicycle is in motion. A person under 16 shall not ride a Class 3 electrical assisted bicycle except as a passenger on a bicycle designed to accommodate passengers. Class 1 and Class 2 do not carry that statewide helmet rule in the sections reviewed; local ordinances can still be narrower. Settle this before you ride a Moffat County route.
No, and that applies to the Moffat County cards specifically. A directory card is a contact lead. Call with the date, rider height, bike brand, motor system, and intended route. Ask the business to confirm the exact rental, diagnostic, or repair service before travelling. Settle this before you ride a Moffat County route.
Use the full return distance for Yampa River Core Trail (nearby, Routt County) or the chosen alternative, not a best-case manufacturer range. Include elevation, surface, weather, detours, and the least confident rider in the plan. Settle this before you ride a Moffat County route.
On a Moffat County route, turn around and follow the manager’s closure notice. Do not bypass barriers or cross private property. Choose a separately confirmed route rather than inventing a connection on the ground. Settle this before you ride a Moffat County route.
The complete local directory is the Moffat County eBike shops and repair contacts page. This guide owns route planning; the county hub owns the full shop list.
