Empty outdoor trail landscape in Gunnison County, Colorado
⚡ Colorado
Explore Gunnison County by eBike
eBikeListings › Colorado › Gunnison County › Things to Do

Things To Do on an eBike in Gunnison County, CO

Gunnison County e-bike riding comes down to who manages the ground. Hartman Rocks Recreation Area, about 3 miles south of Gunnison, is open to e-bikes on all trails. Forest Service land near Crested Butte allows e-bikes on motorized trails only. Dirt roads such as Kebler Pass and Cement Creek are open to all e-bike types, according to Gunnison-Crested Butte tourism. The Crested Butte Recreation Path takes Class 1 only.

Six routes follow, each with length, starting point and class rules where published. Some lengths are not published. The 22.5-mile Slate River to Washington Gulch loop and the 19-mile Reno-Flag-Bear-Deadman loop are the longest of the six. Class 3 access is disputed between sources, so ask the ranger district before taking a Class 3 off pavement.

Orientation map, not a verified riding route.Open county map

Where to ride in Gunnison County

Start in Gunnison for Hartman Rocks and in Crested Butte for the other routes. Hartman Rocks base area parking is on the west side of County Road 38, about 3 miles south of Gunnison. The Recreation Path runs between the town of Crested Butte and the Mount Crested Butte base area. The Deli Trail leaves from behind the Community School. The Reno-Flag-Bear-Deadman loop starts up Cement Creek Road, about 7 miles south of Crested Butte.

Hartman Rocks has the most trail mileage at 40 to 45 miles of singletrack, and all trails are open to e-bikes. The Recreation Path is paved and Class 1 only. The Deli Trail starts as wide dirt and turns paved at Brush Creek Road. The Slate River to Washington Gulch loop runs 22.5 miles on dirt, and Reno-Flag-Bear-Deadman runs 19 miles with three climbs. Teocalli Ridge has a steep 2 mile climb on motorized trail. Only the Recreation Path lists a class limit.

eBike shop hubs

Shops are listed by city. Browse eBike shops in Gunnison or eBike shops in Crested Butte, 6 listings each, to find a rental or repair in the town where you plan to start.

Rental and tour contacts

Rental listings below include Alpineer Crested Butte and Alpine Surf Company. Call ahead to confirm that an e-bike is available, which class it is, and the price, since the Recreation Path takes Class 1 only.

Bicycle rental service · Crested Butte, CO
★★★★½4.8(171 reviews)
📍 419 Sixth St #206 Crested Butte, CO 81224 📞 (970) 349-5210

Alpine Surf Company🚲 Rentals

Bicycle rental service · Gunnison, CO
★★★★½4.6(9 reviews)
📍 905 N Main St Gunnison, CO 81230 📞 (970) 901-0115
Bicycle rental service · Crested Butte, CO
★★★★4.4(20 reviews)
📍 81224, 15 Emmons Loop Crested Butte, CO 81225 📞 (800) 742-7547

Named eBike routes and access checks

1. Hartman Rocks Recreation Area: 40 to 45 miles of singletrack

Hartman Rocks Recreation Area sits about 3 miles south of Gunnison on County Road 38, also called Gold Basin Road. It covers roughly 8,000 acres operated by the BLM, Gunnison County and the City of Gunnison. Published figures range from 40 to 45 miles of singletrack and 33 to 45 miles of road, plus 50 designated dispersed campsites. Every trail is open to e-bikes. Beginner terrain is at Evan's Loop, including Sea of Sage, Lost Dog and Broken Shovel. Aberdeen Loop is the intermediate option. Expert lines include The Ridge, Josh-o's, Josie's, Rattlesnake and Top of the World. Park at the base area on the west side of County Road 38. No class-by-class rule is published for individual trails, so read the signs at the trailhead.

Distance: 40 to 45 miles of singletrack and 33 to 45 miles of road, per Travel Crested Butte and BIKEPACKING.com; start: Base area parking on the west side of County Road 38, about 3 miles south of Gunnison; surface: Singletrack and road; check the manager map for the surface of each trail.

eBike access: All trails are open to e-bikes, per Travel Crested Butte and Gunnison-Crested Butte tourism. No separate class rule is published for individual trails, so follow trailhead signs. Etiquette and planning: Start beginners on Evan's Loop and save The Ridge, Josh-o's, Josie's, Rattlesnake and Top of the World for expert riders. The area has 50 designated dispersed campsites if you stay overnight. Managing source: Travel Crested Butte, Hartman Rocks trails.

2. Recreation Path, paved link to Mount Crested Butte

The Recreation Path connects the town of Crested Butte with the Mount Crested Butte base area. It is a paved commuter and access route, so expect riders heading to work and to the mountain. The Crested Butte Mountain Bike Association says the path is open to Class 1 e-bikes only. Riders are asked to watch their speed and announce themselves when passing. Class 2 and Class 3 riders can use the roads instead, because Gunnison-Crested Butte tourism says all e-bike types are allowed on paved and dirt roads. Colorado law lets a local authority set path rules, so a posted sign overrides general advice. No path length is published.

Distance: Recreation Path: length is not published by the Crested Butte Mountain Bike Association; check the manager map; start: Town of Crested Butte or the Mount Crested Butte base area; surface: Paved, per the Crested Butte Mountain Bike Association.

eBike access: Open to Class 1 e-bikes only, per the Crested Butte Mountain Bike Association. Class 2 and Class 3 riders should take the road instead. Etiquette and planning: Watch your speed and announce yourself when you pass, as riders are asked to do. Expect commuters on this route and ride at a pace that lets you stop for pedestrians. Managing source: Crested Butte Mountain Bike Association, E-Bikes.

3. Deli Trail, dirt path from the Community School to Brush Creek Road

The Deli Trail leaves from behind the Community School in Crested Butte. It begins as a wide dirt path and turns to pavement when it reaches Brush Creek Road. The Crested Butte Mountain Bike Association lists it among its recommended e-bike rides. It gives riders a way onto Brush Creek Road, one of the dirt roads the association names for e-bikes. Neither a length nor a separate class rule is published for the trail; Colorado law applies. Under C.R.S. 42-4-1412, Class 1 and 2 may use bike paths where bicycles are authorized, and Class 3 stays off paths unless the local authority permits it. Check signs at the school trailhead.

Distance: Deli Trail: length is not published by the Crested Butte Mountain Bike Association; check the manager map; start: Behind the Community School in Crested Butte; surface: Wide dirt path that becomes paved at Brush Creek Road, per the Crested Butte Mountain Bike Association.

eBike access: No separate e-bike class rule is posted, and Colorado law applies, so Class 1 and 2 may ride where bicycles are authorized and Class 3 needs local permission on paths, and so check signs. Etiquette and planning: Yield to pedestrians, keep your speed under control and announce yourself when passing. Use a headlight and taillight if you may finish at night. Managing source: Crested Butte Mountain Bike Association, E-Bikes.

4. Slate River to Washington Gulch Loop: 22.5 miles of dirt

The Slate River to Washington Gulch Loop covers 22.5 miles and appears on the Crested Butte Mountain Bike Association's list of e-bike ride options. Slate River and Washington Gulch are both among the dirt roads the association lists for e-bikes, and Gunnison-Crested Butte tourism says all types of e-bikes are allowed on paved and dirt roads. The surface is dirt road and trail. No e-bike class rule is posted for the loop, so state and Forest Service defaults apply. On National Forest land an e-bike is legally a motor vehicle under 36 CFR 212, so ride only routes designated for motor-vehicle or e-bike use. Check the ranger district map before you pick a connector.

Distance: 22.5-mile loop, per the Crested Butte Mountain Bike Association; start: Several access points; check the manager map; surface: Dirt road and trail, per the Crested Butte Mountain Bike Association.

eBike access: Listed by the Crested Butte Mountain Bike Association as an e-bike ride. No class rule is posted, so state and Forest Service defaults apply. Class 3 access is disputed between sources; confirm with the ranger district. Etiquette and planning: Ride single file with the flow of traffic on road sections, use hand signals, and yield to pedestrians. Carry lights if you may finish after dark. Managing source: Crested Butte Mountain Bike Association, E-Bikes.

5. Reno-Flag-Bear-Deadman: 19-mile Cement Creek loop

Reno-Flag-Bear-Deadman is a 19-mile classic loop in the Cement Creek zone. It starts up Cement Creek Road about 7 miles south of Crested Butte. The ride has three sustained climbs and three fast descents, and both the Crested Butte Mountain Bike Association and Gunnison-Crested Butte tourism describe it as much easier with pedal assist. Cement Creek Road is one of the dirt roads listed for e-bikes. No e-bike class rule is posted beyond the motorized-trail allowance. On Gunnison National Forest land, e-bikes may use motorized trails and may not use non-motorized trails. Confirm each trail segment with the ranger district, since district orders can override published routes.

Distance: 19-mile loop, per the Crested Butte Mountain Bike Association and Gunnison-Crested Butte tourism; start: Up Cement Creek Road, about 7 miles south of Crested Butte; surface: Reno-Flag-Bear-Deadman: check the manager page for current surface.

eBike access: Open under the motorized-trail allowance on Gunnison National Forest land. No separate class rule is posted. Class 3 access is disputed between sources, so confirm with the ranger district before riding. Etiquette and planning: Plan battery range for three sustained climbs and keep your speed under control on the three fast descents. Yield to other trail users. Managing source: Gunnison-Crested Butte tourism, E-Biking.

6. Teocalli Ridge Trail, steep 2-mile motorized climb

Teocalli Ridge Trail is in the Brush Creek drainage and is reached by West Brush Creek Road. The Crested Butte Mountain Bike Association describes it as a motorized trail that is great for e-bikes, with an incredibly steep 2 mile climb. Early-season crossings of West Brush Creek and Brush Creek can rage, so use caution in spring runoff. Other trails open to motorized travel in the area include 409.5, 400, 405 (Double Top), Block and Tackle, Hunter Creek and Waterfall Creek. Because Teocalli Ridge is motorized, e-bikes follow the Gunnison National Forest rule that allows them on motorized trails. Class 3 access is disputed between sources, so confirm with the ranger district before riding.

Distance: 2-mile climb, per the Crested Butte Mountain Bike Association; total trail length is not published; start: West Brush Creek Road in the Brush Creek drainage; surface: Teocalli Ridge Trail: check the manager page for current surface.

eBike access: Motorized trail, so e-bikes may use it under the Gunnison National Forest rule, per the Crested Butte Mountain Bike Association. Class 3 access is disputed; confirm with the ranger district. Etiquette and planning: Cross West Brush Creek and Brush Creek with care in early season, when water can run high. Expect a very steep climb and keep battery reserve for the way out. Managing source: Crested Butte Mountain Bike Association, E-Bikes.

Planning a Gunnison County ride

Charging points are not published for the routes in this guide, so charge fully before you leave and ask your shop or rental business about battery range. Hartman Rocks has 50 designated dispersed campsites, which suits an overnight trip. Pack extra range for a long climb on Teocalli Ridge or the three sustained climbs on Reno-Flag-Bear-Deadman, where pedal assist helps most.

Spring crossings and Forest orders are the main planning risks. Early-season water in West Brush Creek and Brush Creek can rage near Teocalli Ridge. Forest and district orders can override published routes, so confirm with the ranger district. Crowd levels, hours and fees are not published for these routes. A 7-mile paved path between Crested Butte and Crested Butte South is a county plan and is not built, so do not plan a ride on it.

Half-day and full-day eBike plans

Half day: Ride Evan's Loop at Hartman Rocks, about 3 miles south of Gunnison. It is beginner terrain, and all Hartman trails are open to e-bikes. Park at the base area on County Road 38. In Crested Butte, the Deli Trail from behind the Community School to Brush Creek Road makes a shorter option. No length is published, so ask your shop.

Full day: Ride the 22.5-mile Slate River to Washington Gulch Loop from Crested Butte on dirt road and trail. Gunnison-Crested Butte tourism says all e-bike types are allowed on dirt roads. For a harder day, the 19-mile Reno-Flag-Bear-Deadman loop has three sustained climbs and three fast descents. Pick one and carry a full charge.

Class 1 rental day: Rent a Class 1 e-bike and ride the paved Recreation Path from the town of Crested Butte to the Mount Crested Butte base area, which takes Class 1 only. Watch your speed and announce yourself when passing. Add the Deli Trail from behind the Community School for dirt. Ask the rental business which class you are getting.

What not to ride in Gunnison County

Signal Peak trail system: E-bikes are not allowed on any trail in the Signal Peak trail system near Gunnison, according to Gunnison-Crested Butte tourism. Hartman Rocks Recreation Area, about 3 miles south of town, is open to e-bikes on all trails and is the nearest alternative.

Non-motorized Forest trails: E-bikes are not permitted on any non-motorized trail on Gunnison National Forest land near Crested Butte. An e-bike is legally a motor vehicle on National Forest System land under 36 CFR 212, so a trail open to conventional mountain bikes may still be closed to e-bikes.

Class 2 and 3 on the Recreation Path: The paved Recreation Path between Crested Butte and Mount Crested Butte takes Class 1 e-bikes only, per the Crested Butte Mountain Bike Association. Class 2 and Class 3 riders should use the road, where all e-bike types are allowed.

Class 3 on trails: Class 3 access is disputed. Gunnison-Crested Butte tourism says Class 3 e-bikes are not allowed on any trails, while CanIBikeHere records Class 3 access on 319 segments across 1,204 miles in the Grand Mesa, Uncompahgre and Gunnison forests. Skip Class 3 on trails until the ranger district confirms.

When to ride Gunnison County

Start early on summer days, since afternoon storms can build over high Colorado terrain. Early-season creek crossings near Teocalli Ridge can rage, so wait out spring runoff there. Snow can linger on higher Forest Service routes into early summer, so lean on dirt roads or Hartman Rocks while higher trails dry. In fall, days shorten and mornings are cold, so carry a headlight and taillight. Hours and crowd levels are not published for these routes.

Colorado eBike laws and route permission

Colorado defines an electrical assisted bicycle in C.R.S. 42-1-102 as a two or three wheeled bike with fully operable pedals and an electric motor not over 750 watts, and there are three classes. Class 1 gives assist only while you pedal and stops assisting at 20 mph. Class 2 can assist without pedaling and also stops at 20 mph. Class 3 assists only while you pedal and stops at 28 mph. A bike that has been modified out of every class, or that is built or sold to be easily configured past the class limits, does not count as an e-bike.

Under C.R.S. 42-4-1412, e-bike riders have the same rights and duties as drivers, subject to local ordinances. Class 1 and 2 e-bikes may use a bike or pedestrian path where bicycles are authorized. A local authority may prohibit them there. Class 3 e-bikes are not allowed on those paths unless the path is within a street or highway or the local authority permits it. Riders under 16 may not ride Class 3, though they can be passengers on a bike designed for passengers. HB25-1197 was signed May 28, 2025 and took effect Aug 6, 2025. It adds seller disclosures and multiple mode e-bike rules. From Jan 1, 2027, multiple-mode labels must show the highest class or each class.

Colorado has no statewide helmet rule for Class 1 or 2 riders. Class 3 operators and passengers under 18 must wear a CPSC or ASTM bicycle helmet with a chin strap. Compliant e-bikes need no license or registration. Labels must show class, top assisted speed and wattage, and must be updated after any modification (C.R.S. 42-4-221). Under HB25-1197, falsely labeling a non-e-bike as an e-bike is a deceptive trade practice. For more detail, see our guide to Colorado eBike laws.

Trail access is decided locally. Under C.R.S. 42-4-111, local authorities may authorize or prohibit e-bikes on bike or pedestrian paths. So a path that allows Class 1 and 2 in one town can be closed to them in the next. Class 3 riders have it tighter, since they need the local authority's permission on most paths. Check the posted rules or the managing agency before you ride, and do not assume a state rule overrides a local sign.

State parks have their own rule. Colorado Parks and Wildlife says Class 1 and 2 e-bikes are allowed on roadways, designated bike lanes, and multi-use trails and other areas open to non-motorized biking. In State Wildlife Areas and State Trust Lands, e-bikes are limited to designated roads, camping and parking where motor vehicles are allowed. The information conflicts on one point: Jeffco and Lakewood pages still say Class 1 e-bikes are allowed in all state parks where bicycles are permitted, which is older wording than CPW's page. Follow CPW and keep your class label accurate too. A modified bike may not legally count as an e-bike.

No Gunnison County or Town of Crested Butte e-bike ordinance text and no municipal e-bike speed limit is published for riders to read, and no county-wide sidewalk rule is published either. Gunnison-Crested Butte tourism asks riders to use the road and not the sidewalk, ride with traffic and single file, signal turns, use a headlight and taillight at night, and yield to pedestrians. Under C.R.S. 42-4-111, local authorities may allow or prohibit e-bikes on paths, so posted signs control.

Class 3 access is a source conflict. Gunnison-Crested Butte tourism states Class 3 e-bikes are not allowed on any trails. CanIBikeHere, a compilation of Forest Service travel data, records Class 3 access on 319 trail segments covering 1,204 miles in the Grand Mesa, Uncompahgre and Gunnison National Forests. Designations change and district orders can override published routes, so verify with the ranger district before riding.

A 7-mile paved multimodal trail corridor between Crested Butte and Crested Butte South is a Gunnison County plan developed with Design Workshop and engineering and environmental specialists. The county plan page describes a plan, not a built trail, gives no opening date and states no e-bike class rule. Separately, HB25-1197 requires multiple-mode e-bike labels to show the highest class or each class from Jan 1, 2027, which matters when you rent or buy.

Frequently asked questions

How long is the Slate River to Washington Gulch Loop?

The loop is 22.5 miles, according to the Crested Butte Mountain Bike Association, which lists it as an e-bike ride option. The surface is dirt road and trail. No e-bike class rule is posted for the loop, so state and Forest Service defaults apply. Confirm the route with the ranger district before you go.

Where does the Reno-Flag-Bear-Deadman loop start?

It starts up Cement Creek Road, about 7 miles south of Crested Butte. The loop is 19 miles with three sustained climbs and three fast descents, and pedal assist makes it much easier. No class rule is posted beyond the motorized-trail allowance on Gunnison National Forest land.

Can I ride an eBike on the Deli Trail in Crested Butte?

Yes, the Crested Butte Mountain Bike Association lists the Deli Trail among its recommended e-bike rides. It leaves from behind the Community School as wide dirt and turns to pavement at Brush Creek Road. No length or separate class rule is published, so Class 3 riders should check signs before using it.

Can I ride my eBike on every Forest Service trail near Crested Butte?

No. On National Forest System land an e-bike is legally a motor vehicle under 36 CFR 212, so it may use only routes designated for motor-vehicle or e-bike use. Locally, e-bikes may go on motorized trails and not on non-motorized trails. CanIBikeHere records conventional mountain bikes designated on 473 segments in the Grand Mesa, Uncompahgre and Gunnison forests.

Are e-bikes allowed on Kebler Pass?

Yes, the Crested Butte Mountain Bike Association lists Kebler Pass among its dirt road rides for e-bikes, and Gunnison-Crested Butte tourism says all types of e-bikes are allowed on paved and dirt roads. No ride length is published, and Gunnison County has more than 1,100 miles of Forest Service roads.

Is there a paved eBike trail between Crested Butte and Crested Butte South?

No, not yet: Gunnison County has a plan for a 7-mile paved multimodal trail corridor between the two, developed with Design Workshop. The county page describes a plan, not a built trail, and it states no e-bike class rule or opening date.

Can I ride a Class 1 eBike on Teocalli Ridge Trail?

Yes, the Crested Butte Mountain Bike Association describes Teocalli Ridge Trail as a motorized trail that is great for e-bikes, and e-bikes may use motorized trails on Gunnison National Forest land. Expect an incredibly steep 2 mile climb. Use West Brush Creek Road to reach it, and take care at early-season creek crossings.

Where can I camp near Hartman Rocks?

Hartman Rocks has 50 designated dispersed campsites, according to Travel Crested Butte. The area is about 3 miles south of Gunnison on County Road 38, and base area parking is on the west side of the road. Camping fees and rules are not published, so check the manager map or posted signs.

All eBike shops in Gunnison County

Compare all Gunnison County eBike shops before you pick a route, then call ahead about class and rental terms.