Clear Creek County rides around Georgetown. The strongest documented bicycle routes here are Scott Lancaster Memorial Bike Path, Peaks To Plains Trail. Nearby-county and regional options are labelled as such, because they are not local loops. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into three classes, so the real question is which manager controls each surface. #Clear CreekCOBikeTrails
This guide separates sourced route facts from permission questions. Check the manager, the bicycle class, weather, and closures before travelling.
No single Clear Creek County corridor covers the county. The routes below mix published lengths from each trail's own manager listing with honest access records where no named measured route was located. Surfaces range from asphalt city paths to crushed-stone and ballast rail beds. Front Range and high-plains paths face wind, hail and summer thunderstorms, mountain corridors face afternoon lightning, and high-country rail-trails stay cooler even in July, with snow lingering into June.
No single route fits every rider or every electric bicycle. Compare distance, starting point, surface, and managing authority before choosing.
Start from Convergence of US 6, US 40, I-70 (Floyd Hill) and County Rd. 314 (Idaho Springs). The documented distance is 5 miles published length. Expect Asphalt. Confirm the access note before choosing this over another Clear Creek County option.
Start from The Catslab Climbing Area and Vanover Park (Golden). The documented distance is 5 miles published length. Expect Asphalt, Concrete. Confirm the access note before choosing this over another Clear Creek County option.
Start from Platte River Trail at Confluence Park (Denver) and Homestead Canyon Rd., Castlewood Canyon Rd. (Franktown). The documented distance is 47.8 miles published length. Expect Asphalt, Concrete, Gravel. Confirm the access note before choosing this over another Clear Creek County option.
Start from S. Rooney Rd. near I-70 (Golden) and Cherry Creek Regional Trail west of S. Parker Rd./SR 83 (Parker). The documented distance is 36 miles published length. Expect Concrete. Confirm the access note before choosing this over another Clear Creek County option.
Start from E 14th Dr (Aurora) and Waterton Rd (Littleton). The documented distance is 71 miles published length. Expect Asphalt, Concrete, Dirt, Gravel. Confirm the access note before choosing this over another Clear Creek County option.
Use these city directories for addresses, phone numbers, detail pages, and claim links. A city page is a contact index, not proof of current rental stock or route access.
These 1 existing cards are categorized as rental, tour, or outfitter contacts. Call before planning around inventory, guide availability, shuttles, or trail permission.
Distance: 5 miles published length
Start: Convergence of US 6, US 40, I-70 (Floyd Hill) and County Rd. 314 (Idaho Springs)
Surface and rider fit: Asphalt
eBike access: eBike access: Scott Lancaster Memorial Bike Path is a manager-listed bicycling route over asphalt. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Clear Creek County.
Etiquette and planning: Documented corridor serving Clear Creek counties. Treat the published length as the whole corridor, not a county-exclusive loop, and plan the turnaround by time and battery. From Clear Creek County, treat this as a drive-in option rather than a local loop.
Scott Lancaster Memorial Bike Path official or managing-source information
Distance: 5 miles published length
Start: The Catslab Climbing Area and Vanover Park (Golden)
Surface and rider fit: Asphalt, Concrete
eBike access: eBike access: Peaks To Plains Trail is a manager-listed bicycling route over asphalt, concrete. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Clear Creek County.
Etiquette and planning: Documented corridor serving Clear Creek, Jefferson counties. Treat the published length as the whole corridor, not a county-exclusive loop, and plan the turnaround by time and battery. From Clear Creek County, treat this as a drive-in option rather than a local loop.
Peaks To Plains Trail official or managing-source information
Distance: 47.8 miles published length
Start: Platte River Trail at Confluence Park (Denver) and Homestead Canyon Rd., Castlewood Canyon Rd. (Franktown)
Surface and rider fit: Asphalt, Concrete, Gravel
eBike access: eBike access: Cherry Creek Regional Trail is a manager-listed bicycling route over asphalt, concrete, gravel. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Clear Creek County.
Etiquette and planning: Documented corridor in Arapahoe, Denver, Douglas counties. Treat the published length as the whole corridor, plan the turnaround by time and battery, and allow travel time to the trailhead. From Clear Creek County, treat this as a drive-in option rather than a local loop.
Distance: 36 miles published length
Start: S. Rooney Rd. near I-70 (Golden) and Cherry Creek Regional Trail west of S. Parker Rd./SR 83 (Parker)
Surface and rider fit: Concrete
eBike access: eBike access: C 470 Bikeway is a manager-listed bicycling route over concrete. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Clear Creek County.
Etiquette and planning: Documented corridor in Arapahoe, Douglas, Jefferson counties. Treat the published length as the whole corridor, plan the turnaround by time and battery, and allow travel time to the trailhead. From Clear Creek County, treat this as a drive-in option rather than a local loop.
C 470 Bikeway (regional day trip, Arapahoe County) official or managing-source information
Distance: 71 miles published length
Start: E 14th Dr (Aurora) and Waterton Rd (Littleton)
Surface and rider fit: Asphalt, Concrete, Dirt, Gravel
eBike access: eBike access: High Line Canal Trail is a manager-listed bicycling route over asphalt, concrete, dirt, gravel. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but the managing authority can be narrower, so confirm the current notice for this segment before riding it from Clear Creek County.
Etiquette and planning: Documented corridor in Arapahoe, Denver, Douglas counties. Treat the published length as the whole corridor, plan the turnaround by time and battery, and allow travel time to the trailhead. From Clear Creek County, treat this as a drive-in option rather than a local loop.
High Line Canal Trail (regional day trip, Arapahoe County) official or managing-source information
Half day: start with Scott Lancaster Memorial Bike Path from Convergence of US 6, US 40, I-70 (Floyd Hill) and County Rd. 314 (Idaho Springs) and turn around at half your comfortable range.
Full day: combine Peaks To Plains Trail with Cherry Creek Regional Trail (regional day trip, Arapahoe County) only if the weather, surface and battery reserve support both, and keep the third as a fallback.
For a route day in Clear Creek County, carry water, a charged phone, the managing source, and only the tools you know how to use. A portable power station for a Clear Creek County trailhead base is an optional charging accessory, not permission to plug in or a substitute for conservative range planning. Build the Clear Creek County return around the battery already on the bike; never assume a public trailhead outlet is available.
A useful Clear Creek County plan starts with one documented route, not a list of pins. Compare Scott Lancaster Memorial Bike Path, Peaks To Plains Trail, and Cherry Creek Regional Trail (regional day trip, Arapahoe County) by start point and surface. Put the longest or least certain option first only when weather, daylight, and battery reserve support it. Otherwise, choose the shorter confirmed outing and keep the second route as a true fallback.
Use Dumont as the first service hub for Clear Creek County riders because it is represented by an existing directory card. Call about repairs or rentals before driving. A shop cannot override a park, trail authority, road closure, or private owner. Keep the manager’s source open on the same phone that holds the route and emergency contacts.
For each of the five Clear Creek County entries above, note whether the mileage is a loop, one way, or chosen by turnaround. Then budget the full return. Surface, elevation, temperature, wind, rider weight, assist level, and tire pressure all change consumption. Leave enough reserve to return without searching for an outlet. If the published information is incomplete, shorten this county ride rather than converting uncertainty into a precise claim.
Do not ride a Clear Creek County river path or rail corridor during flooding, and do not assume a converted rail bed is paved. Avoid exposed alpine and high-plains corridors at midday in July and August, do not treat a nearby-county or regional route as a local loop, and do not ride a high-country path during an afternoon thunderstorm or before snowmelt has cleared the surface.
April through June and September through October are the best Clear Creek County months for a long ride. Summer riding works early or late, and winter city paths depend on whether the city has cleared snow and ice.
C.R.S. 42-1-102(28.5) defines an electrical assisted bicycle as a vehicle with two or three wheels, fully operable pedals, and an electric motor not exceeding 750 watts, and it must match one of three classes. Class 1 assists only while the rider pedals and stops assisting at 20 mph. Class 2 may assist whether or not the rider is pedaling and stops assisting at 20 mph. Class 3 assists only while the rider pedals and stops assisting at 28 mph. The same section excludes electrical assisted bicycles from the motor-vehicle definition, so the practical questions are class, equipment, and which manager controls the surface.
C.R.S. 42-4-221 is the equipment rule. Since January 1, 2018 a manufacturer or distributor must permanently affix a label showing classification number, top assisted speed, and motor wattage in at least 9-point Arial type, and a person may not knowingly change speed capability or motor engagement without replacing that label. Class 2 motors must disengage when the brakes are applied. Class 1 and Class 3 motors must disengage when the rider stops pedaling. Class 3 must carry a speedometer. Lights, a rear red reflector, and brakes that stop the bicycle within 25 feet from 10 mph on dry, level, clean pavement are also required. C.R.S. 42-3-103 exempts electrical assisted bicycles from motor-vehicle registration.
C.R.S. 42-4-1412 gives a rider of an electrical assisted bicycle the rights and duties of a vehicle driver except where a special rule applies, and it lets local ordinances regulate operation as provided in C.R.S. 42-4-111. Class 1 and Class 2 may be ridden on a bike or pedestrian path where bicycles are authorized, unless the local authority prohibits that use. Class 3 may not be ridden on a bike or pedestrian path unless the path is within a street or highway or the local authority permits it. A person under 16 shall not ride a Class 3 electrical assisted bicycle except as a passenger on a bicycle designed to accommodate passengers. A person shall not operate or ride as a passenger on a Class 3 electrical assisted bicycle unless each person under 18 wears a bicycle helmet that meets CPSC or ASTM specifications and is secured with a chin strap while the bicycle is in motion. Read the Colorado eBike laws guide, then check the current notice from the manager of the exact route.
Clear Creek County planning starts with the surface, not the shop list. 5 of the five routes below carry a published length taken from that trail's own manager listing, and the rest are labelled as regional day trips rather than local loops. Ride Scott Lancaster Memorial Bike Path first from Convergence of US 6, US 40, I-70 (Floyd Hill) and County Rd. 314 (Idaho Springs) and treat its published length as the whole corridor, so pick a turnaround point that still leaves battery for the ride back. Clear Creek County surfaces run from asphalt city paths to crushed stone, ballast and cinder rail beds, and a wider tyre is worth more here than more motor. Check the managing agency notice for the exact segment on the morning you ride, because a closure, a resurfacing or a seasonal gate changes the plan more than any spec sheet does.
Start with Scott Lancaster Memorial Bike Path for a Clear Creek County ride. Its documented start is Convergence of US 6, US 40, I-70 (Floyd Hill) and County Rd. 314 (Idaho Springs). Check the linked manager information, current closures, and the posted access rule before travelling. Settle this before you ride a Clear Creek County route.
No. C.R.S. 42-1-102(28.5) sorts electrical assisted bicycles into Class 1, Class 2 and Class 3, but a Clear Creek County route can still be narrower: C.R.S. 42-4-1412 lets a local authority prohibit Class 1 and Class 2 on a path it controls, and Class 3 is off bike or pedestrian paths unless the path is within a street or highway or the local authority permits it. Settle this before you ride a Clear Creek County route.
C.R.S. 42-4-1412(15) requires that each person under 18 wear a bicycle helmet that meets CPSC or ASTM specifications and is secured with a chin strap while a Class 3 electrical assisted bicycle is in motion. A person under 16 shall not ride a Class 3 electrical assisted bicycle except as a passenger on a bicycle designed to accommodate passengers. Class 1 and Class 2 do not carry that statewide helmet rule in the sections reviewed; local ordinances can still be narrower. Settle this before you ride a Clear Creek County route.
No, and that applies to the Clear Creek County cards specifically. A directory card is a contact lead. Call with the date, rider height, bike brand, motor system, and intended route. Ask the business to confirm the exact rental, diagnostic, or repair service before travelling. Settle this before you ride a Clear Creek County route.
Use the full return distance for Scott Lancaster Memorial Bike Path or the chosen alternative, not a best-case manufacturer range. Include elevation, surface, weather, detours, and the least confident rider in the plan. Settle this before you ride a Clear Creek County route.
On a Clear Creek County route, turn around and follow the manager’s closure notice. Do not bypass barriers or cross private property. Choose a separately confirmed route rather than inventing a connection on the ground. Settle this before you ride a Clear Creek County route.
The complete local directory is the Clear Creek County eBike shops and repair contacts page. This guide owns route planning; the county hub owns the full shop list.
